BMW does have some interesting hybrid tech that I wish Toyota can adopt someday.BMW engines paired with series-parallel hybrid system would be awesome though.
The 750e uses a P2 hybrid system. But the motor is connected to the transmission through a 1.6:1 "pre-gearing stage" to amplify the torque. This allows them to use a much smaller and lighter motor (145kW/280N.m) with 5kW/kg power density, while having 450N.m of torque in EV-only mode. The motor spins up to 11500rpm which reduces to 7000rpm in the transmission side to sync with the ICE.
This system would work even better on a strong hybrid since the torque amplification helps more for the weaker motors. The iForce Max uses a 1TM motor which is derived from the 1KM used on the UX300e/Mirai because it can provide 250N.m of torque, but the battery can only discharge at 36kW so they are wasting a lot of potential and adding a lot of weight. If they use BMW's setup they could then use the 4NM motor used on their E-Four SUVs (40kW/140N.m) and save over half the weight. Of course, this system is more complex and harder to service, but the weakest link in hybrid systems is the ICE not the motor.
Their latest 48V mild hybrid system also uses a P1+P2 setup so they can do engine-off coasting and regen braking at the same time. This is very similar to Hyundai's latest 2 motor+6AT hybrid system. All they need is a high voltage battery to get strong hybrid. But the main problem with this approach is cost.
